Panasonic WR-XS3P operating instructions Troubleshooting

Models: WR-XS3P

1 39
Download 39 pages 15.09 Kb
Page 37
Image 37
TROUBLESHOOTING

TROUBLESHOOTING

Check to see the following before request for repair.

If a trouble can not be removed even after checking and trying remedy, contact your dealer.

Trouble

Check item

Remedy

 

 

 

Power does not turn on.

Is the power cord connected between the

Connect the power cord between the

 

inlet socket of this unit and AC receptacle?

power socket of this unit and AC recepta-

 

 

cle.

 

 

 

No sound is heard from the

Is the DIP switch of the assigned input line

Set the DIP switch of the assigned input

speakers connected to SUB

set to OFF?

line to ON.

OUTPUT.

 

(Refer to p. 18)

 

 

 

No sound is heard from the

Are all assign buttons set to OFF (l) or a

Press the assign button for the proper

device connected to MULTI

wrong assign button is set to ON (;)?

input line.

IN .

 

(Refer to p. 8 or p. 19)

 

 

 

No sound is heard from the

Is a CD/MD player connected to LINE IN at the

Disconnect the CD/MD player from LINE

device assigned to MULTI

front panel? The signals from the MULTI INPUT

IN.

INPUT ST jack.

ST jacks, MULTI INPUT MONO connector and

 

 

LINE IN jack are not available at the same time.

 

 

 

 

The volume of the stereo

Is the ST 1- 4 AUTO MUTE switch set to

Set the ST 1- 4 AUTO MUTE switch to OFF.

input line is unstable.

ON?

 

 

 

 

No sound from an input line

The levels of stereo (mono) output lines are

Adjust the level of the STEREO (MONO)

is heard when Mode 1 is

adjusted with the STEREO (MONO) OUT knob.

OUT knob.

selected.

Is the level of the knob set to 0?

 

 

 

 

The power cord insulation is

 

The power cord, plug and connectors are

damaged.

 

worn out.

 

 

This may result in electric shock or a fire.

 

 

Unplug the unit from the receptacle imme-

 

 

diately and refer to qualified service per-

 

 

sonnel.

 

 

 

The power cord, plug and

 

The power cord, plug and connectors are

connectors get hot during

 

worn out.

the use.

 

This may result in electric shock or a fire.

 

 

Unplug the unit from the receptacle imme-

 

 

diately and refer to qualified service per-

 

 

sonnel.

 

 

 

The power cord gets heat

 

The power cord, plug and connectors are

when bent or stretched.

 

worn out.

 

 

This may result in electric shock or a fire.

 

 

Unplug the unit from the receptacle imme-

 

 

diately and refer to qualified service per-

 

 

sonnel.

 

 

 

37

Page 37
Image 37
Panasonic WR-XS3P operating instructions Troubleshooting