Input level:
Impedance: 10 kΩ
oMultiple mono input connector [MULTI INPUT MONO] Connects a microphone. When using this connector, remove the short pin.
Mono: 1 circuit
Input connector:
Input level:
Impedance: 10 kΩ
!0Stereo input jacks [STEREO INPUT L/R 1 - 4]
These XRL connectors receive input signals from up to 4
Stereo: 4 circuits
Input jack: PIN jack unbalanced
Input level:
Impedance: 10 kΩ
!1Mono input connectors [MONO INPUT 1 - 4]
These XLR connectors receive input signals from up to 4 microphones or other input devices.
Mono: 4 circuits
Input connector:
Input level:
Impedance: 10 kΩ
!2AC inlet socket [AC IN]
To use the unit, plug the power cord (supplied as a standard accessory) into this socket and connect it to an AC receptacle.
!3Grounding screw [SIGNAL GND]
Notes:
•An RCA type pin plug cable is recommended for con- nection between the unit and a CD player through the MULTI INPUT ST jacks or the STEREO INPUT 1 - 4 jacks. Use RCA type pin jacks to connect external devices when the devices have both of RCA and XLR type pin jacks.
•When using a condenser microphone, connect it to an external device.
•Do not connect external devices supplying phantom power, as it may damage the unit.
10