Panasonic WR-XS3P operating instructions Mounting into the Rack, Items to prepare, Cautions

■Mounting into the Rack

●Rack

Use either one of the following racks for mounting the unit.

Standard:	WU-RS71, capacity of 29 U (Panasonic)
Long:	WU-RL76, capacity of 41 U (Panasonic)
EIA standard-compliant:	depth 450 mm or more (other than Panasonic)

●Items to prepare

If you use a rack supplied by other than Panasonic, it may require four rack mounting screws (option) or four M5 x 12 screws. (If you use a Panasonic rack, you can use the tapping screws supplied with the rack.)

Where to install	How to install
1. Install the unit on a rack.	Secure the unit by 4 pieces of rack
	mounting screws (M5 x 12) in the
	accessories.

Apply the screws in the accessories.

Note: Attach the four rubber feet if not installing the unit in a rack.

Attach 4 rubber feet.

Cautions:

•When mounting this unit in a place where it is frequently subject to vibrations, secure its rear to the rack with reinforcing angle steel (manufactured locally) or other materials.

•Keep the temperature in the rack below 45°C.

•Place this unit below heat-producing devices such as amplifiers if possible.

•If placing the unit below and above heat-producing devices such as amplifiers cannot be avoided, keep a distance of 1 U or above the heat-producing devices.

•Use the rack mounting screws (nominal diameter: 5 x 12) supplied with the brackets if the mounting positions of the rack are not tapped. If the screws are used at tapped positions of the rack, the original threads may be destroyed.

•The rack mounting screws in the accessories do not fit all types of racks. In that case, use the screws included with the rack or buy your own screws.

12