Panasonic WR-XS3P Input Line Setting for SUB OUTPUT, DIP switch setting, Stereo Mono, On Off

■Input Line Setting for SUB OUTPUT

The SUB OUTPUT jack at the rear panel can output any signal from the STEREO INPUT 1 to 4 jacks or MONO INPUT 1 to 4 connectors. The output setting is determined with the DIP switch setting.

The input signal from the LINE IN jack, MULTI INPUT ST jacks or MULTI INPUT MONO is also assignable to the SUB OUTPUT jack. The output setting is determined with the assign button setting at the front panel. Refer to p. 19.

Any output can be assigned. Both mono and stereo inputs are available.

POWER

																							ST		MONO SUB	STEREO OUT			MONO OUT		Audio Mixer WR-XS3
																										4	6		4	6
	1		2	MONO			3			4			1		2	STEREO			3			4		MULTI IN		INPUT					SUB OUT
4	6		4	6		4	6		4	6		4	6		4	6		4	6		4	6		4	6	REAK					4	6
2	8	2		8	2			8	2	8	2		8	2		8	2		8	2		8	2		8	2	8	2			8	8
																										LINE IN					2
0	10		0	10		0	10		0	10		0	10		0	10		0	10		0	10		0	10	0	10		0	10	0	10

●DIP switch setting

The input line is assigned to the SUB OUTPUT jack by setting Switches MONO 1 to 4 and STEREO 1 to 4. When all DIP switches are set to ON, the associated input signal is assigned to the SUB OUTPUT jack. More than one input line is selectable.

ON

OFF

4 3 2 1 4 3 2 1

STEREO MONO

INPUT SELECT

The figure shows an example that assigns the MONO INPUT 3 connector, STEREO INPUT 2 jack, and STEREO INPUT 4 jack to the SUB OUTPUT jack.

18