■Cable Information
The usable cable types, plugs, and connectors are the following. Before connection, sure you are using the proper cables.
●Pin plug
HOT
HOT
GND | GND |
●Tip-ring-sleeve (TRS) phone plug
HOT(Tip)
HOT
COLD(Ring)
GND(Sleeve)
●XLR connector (XLR3-12 type)
Screw (x3)
Spring washer
H (HOT)
2 (HOT) | 2 |
1 3
GND
(COLD)3 1(GND)
Caution:
C (COLD)
No.2 pin of the XLR connector of this unit is hot. When connecting a device whose No.3 is hot, connect No.2 pin (No.3 pin) of this unit to No.3 pin (No. 2 pin) of the device.
Notes:
•Be sure to use shielded wire for audio input/output lines.
•Use a cable of less than 10 m length for a
insufficient.
Use a cable less than 50 m when using a
•Keep speaker lines away from input lines. Failure to do this may cause unstable operation and shaking.
13