Topcom 1300 DUO PACK Adjusting Speaker Volume, Receiving a Signal, Transmitting a Signal, Monitor

Models: 1300 DUO PACK

1 124
Download 124 pages 41.12 Kb
Page 7
Image 7

 

TOPCOM TWINTALKER 1300 DUO PACK

13.2 ADJUSTING SPEAKER VOLUME

 

The Speaker Volume can be adjusted using

/ . The Speaker Volume level is displayed on the

SC

 

LCD.

 

TX RX

 

13.3 RECEIVING A SIGNAL

The unit is continuously in the RECEIVE mode when the unit is ON and not transmitting. When you receive a signal on the current channel, the RX icon is displayed.

SC

TX RX

 

 

In order for other people to receive your transmission, they must be set

 

 

 

 

 

on the same channel.

 

 

 

 

13.4 TRANSMITTING A SIGNAL

ENGLISH

SC

• Press and hold PTT to TRANSMIT.

• Hold the unit in a vertical position with the MICROPHONE 10 cm from the mouth and speak into the microphone.

TX RX

• Release PTT

when you have finished transmitting.

 

13.5 CHANGING CHANNELS

The PMR has 8 available channels.

To change channels:

• Press once, the current channel number flashes on the LCD Screen.

SC

or

to change the channel.

• Press

• Press

PTT to confirm the channel selection and return to NORMAL mode.

TX RX

 

 

NOTE: Any PMR set on the same channel can receive and listen to the conversation.

13.6 MONITOR

You can use the MONITOR feature to check for weaker signals in the current channel.

Press button for normal monitoring .

Press and hold . After 5 seconds you can release the button. You are now continuous monitoring the channel until you press again.

13.7 CHANNEL SCAN

CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.

• Press and hold and for 2 seconds.

SC

• Release the buttons.The channel on the display changes as it scans through the channels.

 

• When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear the

TX RX

active signal.

 

 

• When an active signal (one of 8 channels) is detected, press

or

to bypass the current channel

 

 

and continue to search for another active channel

 

 

 

• Press PTT to communicate through the active signal channel or press

to deactivate channel

 

scan.

 

 

TOPCOM TWINTALKER 1300 DUO PACK

7

Page 7
Image 7
Topcom 1300 DUO PACK Adjusting Speaker Volume, Receiving a Signal, Transmitting a Signal, Changing Channels, Monitor