Playing Back

Transfer audio data from your computer to the player beforehand (page 14).

You can change the language to your own for the menu and the messages in the display (page 27).

1 After setting the BUILT-IN BATTERY switch to ON (page 8), connect headphones to the player.

Headphones

to (headphones)/

LINE OUT jack

2 Press .

(play) appears on the left bottom of the display and the player starts playback.



appears.

3 Adjust the volume by pressing VOLUME +/–.

VOLUME +/–

Notes

When using the built-in battery, if the player is not operated for about 30 seconds while in stop mode, the display automatically turns off. When scrolling track titles, etc., the display turns off about 30 seconds after scrolling is finished.

When using the AC power adaptor, if the player is not operated for about 3 minutes while in stop mode, the display automatically turns off. When scrolling track titles, etc., the display turns off about 3 minutes after scrolling is finished.

If playback does not start, make sure that the HOLD switch is set to off (below).

Locking the controls

(HOLD)

You can prevent accidental button presses while carrying the player by locking the controls. “HOLD” flashes on the display if you press any button when the HOLD function is activated.

1 Slide the HOLD switch in the direction of the arrow.To unlock the controls

Slide the HOLD switch in the direction opposite to that of the arrow.

18