Getting help

Sony Notebook User Guide

n N

83

If you are using an external display, check that it is plugged into a power source and turned on. Check that you have switched to the external display and that the brightness and contrast controls are adjusted correctly.

Moisture condensation may have occurred. Do not use the computer for at least one hour and then turn it on.

If the message Press <F1> to resume, <F2> to set up appears at the bottom of the display, you need to initialize the BIOS.

Take the battery pack off the notebook, unplug the power cord and plug it again, then turn on the power.

The message Press <F1> to resume, <F2> to setup appears at startup

If the floppy disk drive is empty, proceed as follows to initialize the BIOS:

1Turn off the computer.

2Remove any peripheral devices connected to the computer.

3Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears.

4Set the date (month/day/year).

5Press Enter.

6Press the arrow keys to select System Time.

7Set the time (hour:minute:second).

8Press Enter.

9Press the arrow keys to select the Exit menu.

10Press the arrow keys to select Get Default Values and then press <Enter>. The Load default configuration now? message appears.

11Make sure that Yes is selected and then press <Enter>.