Getting help

Sony Notebook User Guide

n N

90

If you have plugged the computer into a UPS (Uninterruptible Power Supply), make sure the UPS is turned on and works.

If you are using an external display, check that it is plugged into a power source and turned on. Check that you have switched to the external display and that the brightness and contrast controls are adjusted correctly.

Moisture condensation may have occurred. Leave the computer off for at least one hour and then turn it on.

When the internal backup battery is low on power, it may not be able to start your system properly. Leave the unit for a while until the battery is recharged, then try to start it.

The message 'Press <F1> to resume, <F2> to setup' appears at startup

If the floppy disk drive is empty, proceed as follows to initialise the BIOS:

1Turn off the computer.

2Remove any peripheral devices connected to the computer.

3Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears.

4Set the date (month/day/year).

5Press Enter.

6Press the arrow keys to select System Time.

7Set the time (hour:minute:second).

8Press Enter.

9Press the arrow keys to select the Exit menu.

10Press the arrow keys to select Get Default Values and then press <Enter>. The message Load default configuration now? appears.

11Make sure that Yes is selected and then press <Enter>.