VAIO Computer User Guide
80
Increasing the system memory may also help. The computer has two
memory slots. For memory upgrades, use only 3.3V 64-bit PC-133 SDRAM
DIMM modules. For information on installing memory, please see the
section, “Adding Memory” .
Topi c: My i .L IN K® device does not appear on the desktop.
1Turn off and disconnect your device.
2Reconnect your device.
3Turn on your device.
Topic: My connected printer doesn't function after the computer resumes from
a power saving mode.
When this occurs, follow the procedures below to reset the printer connection:
1Right-click My Computer on the desktop and then select Properties.
2Click the Device Manager tab.
3Select Refresh, and then click OK.
4The printer should now function properly.
Topic: How do I enable my Ethernet interface?
1Click My Computer on the desktop.
2Click on Control Panel and then click on System.
3Click the Device Manager tab.
4Click on the Network Adapters category, and then select “Realtek RTL8139
(A/B/C/8130) PCI Fast Ethernet NIC.”
5Click the Properties button.
6Remove the checkmark from the option, “Disable in this hardware profile.”
7Click OK.
8Close the Control Panel window.