VAIO Digital Studio Reference Manual
46
6Remove the drive bay cover (shiny and silver) by pushing it from
behind (use a long object or your finger). Store for future use.
7Slide the drive into the drive bay until the holes on each side of the
drive align with the holes on each side of the chassis.
✍If the drive you are installing is a 3½” drive, you must attach conversion brackets so that
the 3½” drive can fit inside of a 5¼” bay. See the instructions that came with your new
drive.
KY0092.VSD
Drive bay cover
Drive bay
KY0094.VSD