Removing, Installing, and Replacing Components
35
7Align the module over the appropriate socket, noting the location of pin 1 on the module and pin 1 on the socket.
Press down here
Handles |
Pin 1 side
DIMM2
DIMM1
Memory module (DIMM)
1 
Indicates pin 1
OM04586.VSD
8Carefully but firmly insert the edge of the module into the socket.
9Press down firmly and evenly at both corners until the module is fully seated.
✍When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place.
10Replace the power supply (see “Replacing the Power Supply” on page 51).
11Replace the cover (see “Replacing the Cover” on page 26).
