Sony PCV-RX2 Editing AVI files, End, End, End, End, End, Edit, Begin, Begin, Begin, Begin, Begin, Preview, Edit a clip, Assemble List, DVgate Assemble - Clip

Using Video software n N

About the software on your Sony desktop

31

Editing AVI files

You can edit the AVI files in the Assemble List for the exact scenes you want to use. For example, there is no need to recapture files even if you only want to use one particular scene from a longer video sequence originally captured with DVgate Motion. Note that the process of removing the exact scene is only enabled when one AVI file is selected from the Assemble List. However, this command is disabled when more than one file are selected.

To edit the AVI files in the Assemble List for the exact scenes you want to use, proceed as follows:

1Launch DVgate Assemble.

2Select the AVI file you want to edit in the Assemble List.

3Choose Edit a clip... from the Edit menu.

The DVgate Assemble - Clip dialog box appears.

4Click the Preview button.

The video sequence of the selected file is played back.

You can move the playback position to the Begin point or the End point by clicking the Begin or End point of the image.

Click the Begin button when you see the scene to be used as the Begin point.

The Begin point image and the time code appear in the lower part of the dialog box. Click the End button when you see the scene to be used as the End point.

The End point image and the time code appear in the lower part of the dialog box.

5Click OK.

The AVI file is edited.