7 Press CHANNEL+/– to select the minute, then press SET.

The minute is set. The clock starts and the time is displayed.

Step 6: Performing the Setup Using

Your CLIÉ TM Handheld

After completing the first 5 steps, install Video Utility from the supplied Installation CD-ROM and make initial settings for timer REC presets (tuner, channels, etc.) using your CLIÉ handheld.

Installing the software on your CLIÉ handheld

Follow the procedure below to install Video Utility on your CLIÉ handheld from the supplied Installation CD-ROM.

Note

Before installing, it is necessary to connect your CLIÉ handheld to your computer using a cradle or a USB HotSync cable to perform the HotSync operation. For details on how to connect your CLIÉ handheld to your computer, refer to the “Handbook” of CLIÉ handheld.

1 Insert the supplied Installation CD-ROM into the CD-ROM drive of your computer.

The Install CD-ROMwindow is displayed.

zHint

If the installer does not start automatically, double-click on the CD-ROM icon, then double-click [Setup] (Setup.exe).

2 Click [CLIÉ Software] from the categories displayed on the left side of the Install CD-ROMwindow and click [Install] for Video Utility.

3 Proceed with the installation following the on-screen instructions.

Select a CLIÉ user name on the user name selection screen.

continued

Settings and Hookups Basic

21