3 Use the supplied antenna cable to connect the splitter’s other output jack to the VHF/UHF IN jack on the Video Recorder.
When connecting a TV and VCR
Video Recorder
Antenna cable (supplied)
Splitter (not supplied)
Antenna cable (not supplied)
Wall
To VHF/UHF IN
Antenna cable (not supplied)
VCR
VHF/UHF
IN
To VHF/UHF IN
TV
Signal source
Settings and Hookups Basic
For details on the connections above, refer to the operating instructions of your VCR or TV.
Hookup 3: Connecting to a cable box
Use this hookup for a cable box.
1 Use an antenna cable (not supplied) to connect the signal source coming from your wall to the single (input) jack of the splitter (not supplied).
2 Use an antenna cable (not supplied) to connect one of the splitter’s two output jacks to the VHF/UHF IN jack on your
TV.
continued
15