Getting Started

Unpacking

Verify that the following items are included with your Stereo Turntable System Package:

•PS-DJ9000 Stereo Turntable System (2)

•MX-DJ9000 Audio Mixer (1)

•Platter (2)

•Slip mat (2)

•Dust cover (with hinges) (2)

•Counterweight (2)

•Cartridge and headshell (2)

•45 adaptor (2)

•Audio cord (with ground wire) (2)

•AC power cord (2)

•AC power adaptor cord (1)

•Audio cord (without ground wire) (2)

Assembling the Turntable

2

5

1

3

4

1Carefully place the platter onto the spindle. Make sure the two pins on the bottom of the platter are properly inserted into the two holes in the motor, as indicated by the arrows in the illustration above.

2Place the slip mat on the platter.

3Slide the counterweight onto the shaft at the rear of the tonearm and turn 3 or 4 times in the direction of the arrow.

4Insert the headshell into the end of the tonearm. Turn the locking ring in the direction of the arrow until the headshell is secure.

5Insert the hinges on the dust cover into the hinge pockets on the rear of the cabinet.

4