Sony PMPK-DJ9000 To play an another part of the record, To play a 45 single, Using the PITCH BEND + and

Operations

To play an another part of the record

1Set the cueing lever to the up position to raise the stylus.

2Move the tonearm to the desired position.

3Set the cueing lever to the down position.

To play a 45 single

Place the supplied 45 adaptor onto the spindle. Press SPEED to select 45 rpm.

The green indicator changes to red.

After you have finished using the adaptor, return it to the adaptor tray.

Using the PITCH BEND + and – buttons

You can use the PITCH BEND + and – buttons to synchronize the beat of the selection playing on one turntable with the beat of another selection playing on the other turntable. You can use these buttons even if the QUARTZ lock button is turned on or off.

1Use the PITCH ADJ. knob to synchronize the speed of the selection playing on one of the turntables with the speed of the selection on the other turntable.

2Press the PITCH BEND + and – buttons to synchronize the beat of both selections. Pressing and holding down the + or – button causes the selection to play 10% faster or slower than the normal playing speed.

zIf the strobe dots are not stationary when the PITCH ADJ. knob is set to the center position

Adjust the platter speed by sliding the PITCH ADJ. knob toward + or – until the strobe dots become stationary.

Sony PMPK-DJ9000 To play an another part of the record, To play a 45 single, Using the PITCH BEND + and – buttons

To play an another part of the record

To play a 45 single

Using the PITCH BEND + and – buttons

zIf you have an extra headshell, keep it in the headshell holder.