Appendixes

Important Notes on Operation

Appendixes

Use and Storage

Do not subject the unit to severe shocks

The internal mechanism may be damaged or the body warped.

Do not cover the unit while operating

Putting a cloth, for example, over the unit can cause excessive internal heat build-up.

After use

Always set the power switch to OFF.

Before storing the unit for a long period

Remove the battery pack.

Grip the handle when carrying

Grip the handle to carry. If you carry it by other parts, such as the front micrphone block or the viewfinder, the camcorder may drop, causing injury.

Do not leave the camcorder with the lenses facing the sun

Direct sunlight can enter through the lenses, be focused in the camcorder, and cause fire.

Shipping

•Remove the memory cards before transporting the unit.

•If sending the unit by truck, ship, air or other transportation service, pack it in the shipping carton of the unit.

Care of the unit

Remove dust and dirt from the surfaces of the lens using a blower.

If the body of the unit is dirty, clean it with a soft, dry cloth. In extreme cases, use a cloth steeped in a little neutral detergent, then wipe dry. Do not use organic solvents such as alcohol or thinner, as these may cause discoloration or other damage to the finish of the unit.

In the event of operating problems

If you should experience problems with the unit, contact your Sony dealer.

Note about the battery terminal

The battery terminal of this unit (the connector for battery packs and AC adaptors) is a consumable part.

The unit may not operate properly if the pins of the battery terminal are bent or deformed by shock or vibrations, or if they become corroded due to prolonged outdoor use.

If you notice bending, deformation, or surface corrosion, contact your dealer or a Sony service representative as soon as possible to have the battery terminal replaced.

Periodic inspections are recommended to keep the unit working properly and to prolong its usable lifetime.

Contact your dealer or a Sony service representative for more information about inspection.

Use and storage locations

Store in a level, ventilated place. Avoid using or storing the unit in the following places:

•In excessive heat or cold (operating temperature range: 0ºC to 40ºC or 32ºF to 104ºF) Remember that in summer in warm climates the temperature inside a car with the windows closed can easily exceed 50ºC (122ºF).

•In damp or dusty locations

•Locations where the unit may be exposed to rain

•Locations subject to violent vibration

•Near strong magnetic fields

•Close to radio or TV transmitters producing strong electromagnetic fields.

•In direct sunlight or close to heaters for extended periods

To prevent electromagnetic interference from portable communications devices

The use of portable telephones and other communications devices near this unit can result in malfunctions and interference with audio and video signals.

144

Important Notes on Operation

Page 143 Page 145
Page 144
Image 144
Sony PMW-EX3 manual Important Notes on Operation, Use and Storage, Shipping, Care of the unit, Use and storage locations
Page 143 Page 145

PMW-EX3 specifications

The Sony PMW-EX3 is a professional camcorder that has established itself as a favorite among filmmakers, broadcasters, and content creators. Launched as part of Sony's XDCAM EX series, the PMW-EX3 is renowned for its versatility, robust features, and high-quality output.

One of the PMW-EX3's standout features is its ability to record in high-definition using the MPEG-2 compression codec, allowing for 1080p, 1080i, and 720p recording options. This flexibility makes it suitable for a wide range of applications, from documentary filmmaking to commercial shoots. The camcorder supports various frame rates, including 24p, 30p, and 60p, enabling users to achieve a cinematic look or high-speed motion recording depending on project requirements.

The EX3 utilizes a 1/2-inch Exmor CMOS sensor that excels in low-light conditions, delivering stunning image quality with rich detail and dynamic range. This sensor contributes to the camera's ability to produce vivid colors and natural skin tones, which is essential for professionals seeking to create visually compelling content.

Another notable feature is the interchangeable lens system. The PMW-EX3 comes equipped with a 14x Fujinon zoom lens, but users have the option to use a variety of lenses thanks to its compatibility with Sony's PL-mount. This adaptability allows for creative freedom when it comes to framing shots and achieving various visual styles.

The camcorder's extensive connectivity options enhance its functionality. It includes HDMI, SDI, and composite outputs, giving users the flexibility to connect to external monitors, recorders, or switchers during live productions. The EX3 also features two SxS memory card slots for simultaneous recording and relay recording, ensuring that users have a reliable workflow without interruptions.

For audio capture, the PMW-EX3 is equipped with two XLR inputs that support professional-grade microphones. This feature is crucial for filmmakers and broadcasters who require high-quality sound to complement their visuals.

The ergonomic design of the PMW-EX3, coupled with its lightweight build, makes it easy to handle for extended shooting periods. The user-friendly controls and customizable settings allow operators to quickly adapt to changing shooting environments, ensuring they never miss a shot.

In conclusion, the Sony PMW-EX3 combines high-definition recording capabilities, versatile lens options, and professional audio features in a compact and user-friendly package. Its reliability and exceptional image quality make it a valuable tool for anyone serious about video production.
Top Page Image Contents