Sony PMW-EX3 manual Return the shoulder pad to its original position, To attach the DC cable clamp

3 Insert the cheek pad from the back of the camcorder and secure it with the supplied screws.

Align the holes on the bottom of the mount frame of the cheek pad with those of the camcorder.

Preparations	Mount frame of
	the cheek pad
	-EX3
	PMW

4 Return the shoulder pad to its original position.

Supplied screw

Cable clamp

-EX3

PMW

Pole of the cheek pad

6 While holding the pole upward, flip the pad toward the side panel of the camcorder.

	-EX3
	PMW
	1
3	3

2

1Insert the axis of the shoulder pad in the hole of the camcorder.

2Secure the fixing plate to its original position with the screw.

3While holding the knob, push in on the shoulder pad.

5 Attach the cable clamp you removed in step 2.

Align the hole of the cable clamp with those on the mount frame of the cheek pad (at the top of the pole) and the camcorder then secure them all together with the supplied screw.

(Keep the original screw removed in step 2 for future use.)

				IOUT
				SD
			HDV
T				IN
LEC		INT		NLOCK
SE		EXT		GE
LOT	AUTOUAL
S
	MAN	IO
		AUD
		IN	INT	I
-1	IO		EXT	TC
CH	AUD CT	AUTOUAL
IO	SELE			OTE
AUDEL		MAN
LEV				REM
	-2
CH
				TCOU

	-EX3
	W
	PM
	N
	OPE
EDIA	Cheek pad

To attach the DC cable clamp

The supplied DC cable clamp can be attached to the frame of the cheek pad at one of the accessory screw holes on the opposite side of the pad.

The DC power output cable (page 29) of the BC- U1/U2 connected to the DC IN connector can be tied down with the clamp.

40

Using the Cheek Pad