CONTROLS AND ADJUSTMENTS
"Color" Menu |
|
| |
| Color |
| Color |
Mode 1 | 62 | Mode 1 | 52 |
Mode 2 |
| Mode 2 |
|
Mode 3 | 68 | Mode 3 | 51 |
Mode 4 |
| Mode 4 |
|
9300°K | 62 | 7500°K | 61 |
Mode 1 | Mode 2 |
| Color |
Mode 1 | 50 |
Mode 2 |
|
Mode 3 | 50 |
Mode 4 |
|
6500°K | 50 |
Mode 3
Color |
|
Mode 1 | 58 |
Mode 2 |
|
Mode 3 | 47 |
Mode 4 |
|
5000°K | 23 |
Mode 4
English
a.By pressing the "Color" key you can select between mode 1, 2, 3 or 4 to store your user defined color settings.
b.Press the "▼" or "▲" key to select the R/G/B gain, then press the "+" key to increase or press the
Contrast and Brightness Control
:50
:100
When the OSD menu is switched off, proceed as follows to adjust the contrast or brightness:
a.Press the "+" or
b.Press the "▲" or "▼" key to increase or decrease the brightness level.
BNC/D15 / Exit Switch
a. BNC/D15 selection
• While the OSD window is not displayed.
• Select the BNC/D15 by pressing the key. b. Exit Switch
Energy Declaration
• You can turn off the OSD window by pressing this key.
This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which also supports the VESA DPMS standard to fulfill the requirements of the NUTEK specification 803299/ 94/96. The time settings for switching to a power saving mode are adjusted from the system unit by software. From the first indication of inactivity to power saving position A2 the total time must not be set to more than 70 minutes.
1. VESA | 2. Power Consumption (120/230 Vac) |
VESA DPMS Standard
H. sync | V. sync | Video | State |
|
|
|
|
Off | On | Blank | |
On | Off | Blank | Suspend |
|
|
|
|
Off | Off | Blank | Off |
|
|
|
|
NUTEK | VESA state | LED indicator | Power | |
Consumption | ||||
|
|
| ||
|
|
|
| |
Normal | On | Green | <110W | |
operation | ||||
|
|
| ||
|
|
|
| |
Power Saving | Suspend | Amber | <15W | |
Position A1 | ||||
|
|
| ||
|
|
|
| |
Power Saving | Off | Amber | <8W | |
Position A2 | ||||
|
|
|
According to TCO guidelines, the optimum TCO readings are measured when brightness and contrast are adjusted to their center position.
11
♦♦♦