Sony PRS-T1WC, PRS-T1RC manual General notes on Wi-Fi connectivity, Go to page top

2.Tap [Manual Registration].

3.Tap the [SSID] input area and type in using the on-screen keyboard.

4.Tap the [Security Method] menu (the default value is [Open]), and then tap the supported security type.

5.Tap the [Password] input area and type in your password using the on-screen keyboard, and

then tap [OK] [Save].

6.Tap the saved network SSID in the [Wi-Fi Networks] list on the [Wi-Fi Settings] screen.

7.If prompted for a password, tap the input area and type in the password using the on-screen keyboard.

8.Tap [Connect].

The Reader connects to the Wi-Fi network.

The Wi-Fi connection status is displayed in the status bar. See Details.

For more technical notes, see Details.

General notes on Wi-Fi connectivity

Tap and hold a network SSID in the [Wi-Fi Networks] list to display the access point’s status and related information.

Before connecting to a wireless network, check all requirements, user name and/or password details with the internet/Wi-Fi service provider.

You can configure up to 20 Wi-Fi network connections.

The Reader does not support certain custom Wi-Fi network security systems. For details, contact the internet/Wi-Fi service provider.

If you edit the password of a Wi-Fi network to which you are currently connected, the Reader will attempt to reconnect to the Wi-Fi network using the new password.

To use a static IP address, press the		(Menu) button	tap [Advanced] in the [Wi-Fi
Settings]	tap [Use Static IP]. Do not change this setting unless instructed to by a network

administrator, as the Wi-Fi network connection may not be established correctly.

If an access point’s SSID (Service Set Identifier) is private, enter Wi-Fi connection information manually.

The access point may filter access by MAC address. Check the MAC address by pressing the

(Home) button tap [Settings] [About] [Device Information],

then register the MAC address with the access point to establish a Wi-Fi connection.

When you are connected to a Wi-Fi network, you can also display speed, security and other

Wi-Fi network details by pressing the	(Menu) button and tapping [Connection Information]
in the [Wi-Fi Settings] screen.

An access point, once configured, can be connected to again simply by tapping it in the [Wi-Fi Networks] list and tapping [Connect].

Go to page top

26