Sony PRS-T1WC manual Battery status indicator, Method, Description, Data, transfer, mode, Charging

Method	Description
	You can install the Reader software, or transfer files from your computer to the
	Reader while charging. The Reader cannot be operated.
	After the USB storage screen is displayed on the Reader, it is detected on your
Data	computer, and the “READER” and “SETTING” drives appear on your computer.
transfer	When the	icon* turns into the	icon, charging is complete.
mode	When charging is complete, disconnect the USB cable from the Reader and your
	computer.
	After a short time, the [Home] screen will appear.
	* This icon is only displayed when the Reader is in data transfer mode.
Charging	Press the	(Home) button. The [Home] screen appears. When the		icon
	turns into the	icon, charging is complete.
mode	In this mode, the Reader is not detected by your computer. When charging is
	complete, disconnect the USB cable from the Reader and your computer.

Note

Your computer must be turned on to charge the Reader. The Reader will not be charged if your computer enters sleep mode or standby mode. Keep your computer turned on with a stable and continuous power supply while charging the Reader.

The	(Power) button cannot be used when the Reader is connected to your computer and
charging.
If you turn off the Reader by tapping [Settings]		[Device Shutdown] while in charging

mode, the Reader will stop charging.

Tip

You can also charge the Reader using the AC Adapter (PRSA-AC10/PRSA-AC1A, sold separately). This method of charging will take approximately 2 hours to fully charge the battery.

To change from charge mode to data transfer mode, tap the status bar to display the

notification window tap [USB connected].

Battery status indicator

The battery status indicator shows the charging status or approximate remaining charge of the battery.

29