Location and Function of Parts and Controls 11
Rear/Bottom Panel
aSDI (3G/HD/SD) input and output connectors
(BNC)
IN connector
Input connector for serial digital component signals.
OUT connector
Output connector for serial digital component signals.
Note
The signal from the OUT connector does not satisfy
the ON-LINE signal specifications.
bCOMPOSITE input and output connectors
(BNC)
IN connector
Input connector for composite video signals or audio
signals.
OUT connector
Loop-through output connector.
Note
When inputting a video signal with the jitters, etc. the
picture may be disturbed. We recommend using the
TBC (time base corrector).
cAUDIO input and output connectors (stereo
mini jack)
IN connector
Connect to the audio outputs of external equipment
such as a VCR.
OUT connector
Outputs the audio signal which is selected by the input
select button on the front panel.
When SDI signal is selected, the audio signal of the
channel which is selected in AUDIO SETTING of the
USER CONFIG menu is output.
dPARALLEL REMOTE connector (modular
connector, 8-pin)
Forms a parallel switch and controls the monitor
externally.
For details on the pin assignment and factory setting
function assigned to each pin, see page29.
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
eSERIAL REMOTE connector (RJ-45)
Connect to the network or Sony BKM-15R Monitor
Control Unit by using a 10BASE-T/100BASE-TX LAN
cable (shielded type, optional).
For details, refer to the Interface Manual for
Programmers (English only).

4 5 9 06 7 8

1

2

3