Adjustment Using the Menus
22
FUNCTION BUTTON SETTINGAbout the function assigned to the function button

SCAN

Press the button to change the scan size of the picture.

With every press of the button, the picture switches in

the sequence NORMAL scan t OVER scan t

NATIVE (see “Scan mode image” on page 24).

ASPECT

Press the button to set the aspect ratio of the picture, 4:3

or 16:9.

BLUE ONLY

Press the button to eliminate the red and green signals.

Only blue signal is displayed as an apparent

monochrome picture on the screen. This facilitates

“chroma” and “phase” adjustments and observation of

signal noise.

WFM/ALM
SELECT
•WFM: A waveform monitor is
displayed.
•ALM: An audio level meter is
displayed.
When WFM is selected, the waveform
and audio level are displayed. When
ALM is selected, the audio level is
displayed in eight channels.
The audio levels of WFM or ALM are
displayed when SDI signal is input.
Select the displayed audio level channels
in SDI AUDIO SETTING.
The indications of the waveform (only
when WFM is selected) and audio level
signify as illustrated below, although the
percentage of the waveform, units and
values of the scale for the audio level do
not appear on the display.
When WFM is selected
When ALM is selected
Submenu Setting
-4%
0%
25%
50%
75%
100%
0
OVER
(dB)
-10
-20
-30
-60
12
109%
Audio levelWaveform
Channel number
(The channel number which is selected in
SDI AUDIO SETTING is displayed.)
0
(dB)
-10
-20
-30
-60
OVER
12345678
Audio level
Channel number
(Displayed in eight channels, including the channel
which is selected in SDI AUDIO SETTING.)
POSITION Sets the position of the WFM/ALM
display. You can select from among 1 to
4.
•1: Bottom left
•2: Bottom right
•3: Top right
•4: Top left
Submenu Setting
F1 BUTTON to F7
BUTTON
Assigns the function to the function
buttons of the front panel and turns the
function on or off.
You can assign the function from among
SCAN, ASPECT, BLUE ONLY,
MONO, MARKER, I/P MODE and
WFM/ALM.
Factory setting
•F1 button: BRIGHTNESS
•F2 button: CONTRAST
•F3 button: CHROMA
•F4 button: SCAN
•F5 button: H/V DELAY
•F6 button: VOLUME
•F7 button: I/P MODE
Submenu Setting
F1 BUTTON: xxxx
F2 BUTTON: xxxx
F3 BUTTON: xxxx
F4 BUTTON: xxxx
F5 BUTTON: xxxx
F6 BUTTON: xxxx
F7 BUTTON: xxxx
USER CONFIG –
FUNCTION BUTTON SETTING