Inserting the print paper

Be sure to use the specified print paper.

The descriptions in this manual are for the DCR-TRV30.

For details on camcorder operation, refer to the operating instructions of your camcorder.

1 Perform steps1 and 2 on page 12, and prepare the power supply.

2 Make sure that the PAPER lamp is flashing slowly, and then insert a sheet of print paper into the paper feeder straight making sure that the print surface is facing up.

Insert the print paper until less than 3 cm of print paper is protruding from this unit.

Press the print paper into the paper feeder for about two seconds after the beep.

The print paper starts to be automatically drawn in.

Less than 3 cm

•When the CARTRIDGE lamp is flashing slowly, check the print cartridge.

•If print paper is not inserted, the PAPER lamp flashes slowly. The PAPER lamp flashes fast when an error occurs.

PNote

After you have inserted the print paper, do not close the printer cover until printing ends. Doing so may cause this unit to malfunction.

Preparation

13-US