123GB
Troubleshooting
It takes a long time for the IC
recorder to start.
• If the IC recorder is required to process a large amount of data, it
may take longer for the IC recorder to start. This is not a
malfunction of the IC recorder. Wait until the start-up display
disappears.
The IC recorder does not
operate.
• You may have formatted the me mory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page95).
The IC recorder does not
operate, even if you press
any button.
• The batteries are weak (pa ge 12).
• The power to the IC recorder is off. Slide the HOLD•POWER
ON/OFF switch in the direction of “POWER ON/OFF” for
more than 1 second (page13).
• The HOLD function is activated. Slide the HOLD•POWER ON/
OFF switch in the center direction (page 10).
No sound comes from the
speaker.
• The volume is turned down completely (page 23).
• Headphones are plugged in (page 48).
• When you are listening to the FM radio, “Audio Output” is set to
“Headphones.” Set it to “Speaker” (page 81) (for ICD-PX312F
only).
Sound comes from only one
channel.
• When audio output of an external device connected to the IC
recorder is monaural and the recording mode is set to
“192kbps(MONO)” (SHQ) or “128kbps(MONO)” (HQ), sounds
are recorded only in one channel. In this case, set the recording
mode to “48kbps(MONO)” (SP) or “8kbps(MONO)” (LP) in the
menu (page91).
Sound comes from the
speaker even when the
headphones are plugged in.
• If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.
• When you are listening to the FM radio, “Audio Output” is set to
“Speaker.” Set it to “Headphones” (page 81) (for ICD-PX312F
only).
Symptom Remedy