14GB
Step 4: Setting the Clock
You need to set the clock to use the alarm
function or record the date and time.
When you insert batteries for the first time,
or when you insert batteries after the IC
recorder has been without batteries for
more than 1 minute, “Set Date&Time”
appears, and then the clock setting window
appears.
Set the clock as follows:
1Set the year.
Press –. or >+ to set the year, and
then press NPLAY/STOP•ENTER.
Select the last two digits of the year.
When you press NPLAY/
STOP•ENTER, the cursor moves to the
month section.
2Set the month, day, hour, and minute in
sequence in the same way.
Press –. or >+ to select the desired
figures, and then press NPLAY/
STOP•ENTER.
When you set the minute, the
“Executing...” animation is displayed,
and then the stop mode window appears.
x
NPLAY/
STOP•ENTER
., >+
DISP/MENU