128GB
The IC recorder is not
recognized by your
computer.
A folder/file cannot be
transferred from your
computer.
• Disconnect the IC recorder from your computer and reconnect it.
• Do not use a USB hub or USB extension cable other than the
supplied USB connecting cable.
• Operation is not guaranteed if y ou use any system requirements
other than those described on page117 .
• Depending on the USB port position, the IC recorder may not be
recognized. If this happens, try another port.
The file transferred from
your computer cannot be
played back.
• The file format may differ from those that can be played back
using the IC recorder (MP3(.mp3)). Check the file name
(page118).
The computer cannot start. • If you reboot the computer with the IC recorder connected to the
computer, the computer may freeze or may not start properly.
Disconnect the IC recorder from the computer and reboot the
computer again.
The audio is weak or has
poor quality when listening
to the radio.
(for ICD-PX312F only)
• The batteries are weak. Replace the batteries with new ones
(page11).
• Move the unit away from the TV.
The picture of your TV
becomes unstable.
(for ICD-PX312F only)
• If you are listening to an FM program near the TV with an indoor
antenna, move the IC recorder away from the TV.
You cannot receive FM radio
stations, or a lot of static is
heard.
(for ICD-PX312F only)
• The headphones are not connected (the headphone cord i s the FM
antenna). Connect the headphones to the i(headphone) jack and
extend the headphone cord.
• “DX/LOCAL” has been set to “LOCAL.” Set it to “DX”
(page79).
You cannot preset an FM
radio station.
(for ICD-PX312F only)
• You have already preset 30 FM radio stations. Erase unwanted
preset stations (page77).
• “Scan Sensitivity” has been set to “Low.” Set it to “High”
(page80).
Symptom Remedy