Sony RB550H, RB358H Flexible Camera Angle Settings, Tilt Adjustment, Pan Adjustment, Installation

Models: RB550H

1 17

Page 14

INSTALLATION

The bracket assembly allows to tilt +25 ~ - 45 and to pan L/R +100 ,

making it possible to freely adjust the camera angle.

Loosen the tilt lock screw in a counterclockwise direction and adjust the tilt angle for the camera.

TILT BRACKET

TILT LOCK

SCREW

MOUNTING

PLATE

CONDUIT HOLE 1-14 UNC

CONDUIT HOLE 3/4-14 UNC

MOUNTING ARM

After adjusting the tilt angle, tighten the tilt lock screw in a clockwise direction using the provided driver.

By using the pan lock screw in the same manner as the tilt adjustment the appropriate viewing angle can be achieved.

PAN LOCK SCREW

-13-

Image 14

Contents

Tel 866-301-CCTV, Fax Rugged CCTV 5327 Cedar Creek, Kemp, Texas 75143, USAFEATURES TABLE OF CONTENTSPRECAUTIONS INSTALLATIONSafety PRECAUTIONSFEATURES InstallationPART NAMES 1. INT/LL CONTROLS DC12V / AC24V~ Dual Power Type2~4. WHITE BALANCE SWITCHESATW=Auto White Balance /MWB =Manual ATW Mode5. AGC ON/OFF 13. LENS CONNECTOR15. POWER CORD 6. ALC/ELCVZLWFKHUXQLWV 21752/6QWHUQDODQG/LQH/RFN6\QF RQWKHPRQLWRUQDEOHWKLVPRGHWRSUHYHQWWKLVVPRRWKWURXEOHIUHHLQVWDOODWLRQ ,167$//$7,21,QLWLDOFKHFN 0RXQWLQJWKHEUDFNHWINSTALLATION 3 - 2. Connecting the PowerFIXED BOLT 4. Sunshield InstallationINSTALLATION RAILUnscrewWKHIURQWRIWKHKRXVLQJWRHSRVHWKHOHQV =RRP RFXV$GMXVWPHQW1R+HDWHUW\SH +HDWHUW\SH8QVFUHZWKHIURQWKRXVLQJE\WXUQLQJFRXQWHUFORFNZLVH +286,1Screw the Housing clockwise to close after setting Put the Heater back on, in its original position, after adjustmentSlide the housing back on as shown below HOUSING6-2. PAN ADJUSTMENT 6. Flexible Camera Angle Settings6-1. TILT ADJUSTMENT INSTALLATIONIf there is no picture on the monitor screen TROUBLESHOOTINGIf there is a video noise or other unknown problems If the picture on the monitor screen is not clearModel No DIMENSIONS UNITSmm