PART NAMES
13
12 11
10
1 | 2 | 14 | 3 | 4 | 5 | 6 | 7 |
|
9
1.GLASS HOLDER : Retaining ring for front glass.
(To keep the unit weather proof, do not unscrew this section)
2.HOUSING : Unscrew this section to gain access to adjust the lens and dip switches.
3.LENS :
4.LENS MOUNT LOCK : Lock screw used to secure the lens mount.
5.FUNCTION CONTROL BOARD : Board to adjust the various settings of the camera.
6.AIR VENT : Provides airflow to the internal fan.
(Keep this vent pointed down to prevent water from entering the housing)
7.BRACKET ASSEMBLY : Rear cover and pan/tilt bracket where cables are concealed and passed through.
8.FAN : If the internal temperature of the camera rises, the fan
will operate automatically to prevent over heating of the camera components.
9.CABLE SET : Cables for power and video
10.BODY : Main section of the camera that contains the electronics.
11.SUNSHIELD LOCK SCREW : Secures the sunshield in the desired position.
12.MOUNT : These holes allow the camera to be top or bottom mounted.
13.SUNSHIELD : Protects the camera from excess heat and glare.
14. OPTIONAL HEATER : Protects the camera from cold environments.