17Press ENTER.

The Setup Display for the DTS signal appears.

EASY SETUP

Audio Connection

6/6

DTS

On

Off

18Select whether or not you wish to send a DTS signal to your amplifier (receiver), and press ENTER.

If your AV amplifier (receiver) has a DTS decoder, select “On.” Otherwise, select “Off.”

19Press ENTER when “Finish” appears.

Easy Setup is finished. All connections and setup operations are complete.

If you use the cable box/satellite receiver control, check that the control works correctly (see below).

EASY SETUP

Easy Setup is finished.

Finish

Checking the cable box/satellite receiver control setting

1 Point the remote at the recorder (not at the cable box/satellite receiver.)

2 Press CH +/– and check that the channel changes on the cable box/satellite receiver window.

3 Press the number buttons and check that the channel changes on the cable box/ satellite receiver window.

To fix the set top box controller to your cable box/satellite receiver

Once you have confirmed that the set top box controller controls your cable box or satellite receiver, fix it in place.

1Remove the backing on the double-sided tape.

2Attach it so that the cable mouse is directly above the remote control sensor on your cable box/satellite receiver.

To return to the previous step

Press O RETURN.

zHint

If you want to run Easy Setup again, select “Easy Setup” in the Setup Display (page 81).

Notes

•If there are only a few channels in your area that carry time signals, setting the clock automatically may take up to about 20 minutes after the recorder turns off. If nothing happens even after you wait about 20 minutes, set the clock manually in “Clock” of “Settings” (page 72).

•To record TV programs using the timer, you must set the clock accurately.

•If you use an S-video cord to connect your cable box or satellite receiver, set “Line1 Input” or “Line3 Input” in Video Setup to “S Video” (page 75).

If you cannot get the recorder to control your cable box/satellite receiver

Check the settings at “Set Top Box Control” in Settings Setup (page 73).

Check the connection and position of the cable mouse (page 13).

If your cable box or satellite receiver still does not operate with this recorder, contact your cable company to see if they can provide you with a compatible cable box or satellite receiver.

26