Some functions such as Stop, Search, or Slow- motion Play cannot be performed.

,Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc.

The language for the sound track cannot be changed.

,Multilingual tracks are not recorded on the disc being played.

,The DVD VIDEO prohibits the changing of the language for the sound track.

,Try changing the language using the DVD VIDEO’s menu.

The subtitle language cannot be changed or turned off.

,Multilingual subtitles are not recorded on the

DVD VIDEO.

,The DVD VIDEO prohibits changing of the subtitles.

,Try changing the subtitle using the DVD VIDEO’s menu.

,The subtitles cannot be changed for the titles recorded on this recorder.

The angles cannot be changed.

,Multi-angles are not recorded on the DVD VIDEO being played.

,You are trying to change the angles when “ ” does not appear on the TV screen (page 53).

,The DVD VIDEO prohibits changing angles.

,Try changing the angle using the DVD VIDEO’s menu.

,The angles cannot be changed for the titles recorded on this recorder.

The MP3 audio track does not play.

,The MP3 audio track is not recorded in a format that the recorder can play (page 59).

Recording/Timer recording/EditingThe channel cannot be changed from the channel you are recording.

,Set the TV’s input source to “TV.”

Recording does not start immediately after you press z REC.

,Operate the recorder only after “LOAD”, “FORMAT,” or “INFOWRITE” disappears from the front panel display.

Nothing was recorded even though you set the timer setting correctly.

,There was a power failure during recording.

,The recorder’s internal clock stopped due to a power failure that lasted for more than 1 hour. Reset the clock (page 72).

,The channel was disabled after the timer recording was set. (See “Manual Set” on page 71.)

,Disconnect the AC power cord from the AC outlet, and connect it again.

,The program contains copy protection signals that restrict copying.

,The timer setting overlapped another setting that was set later or has priority (page 46).

,There is no DVD inside the recorder.

,There is not enough disc space for the recording.

,The set top box was turned off.

,The set top box controller was incorrectly connected (page 13).

,The settings in “Set Top Box Control” in Settings Setup have been changed (page 73).

Recording does not stop immediately after you press x REC STOP.

,It will take a few seconds for the recorder to input disc data before recording can stop.

Recording does not stop after you press xSTOP.

,Open the remote’s cover and press x REC STOP.

84