Sony RDR-GX300 Changing the priority of overlapped settings, 1 Press SYSTEM MENU, When the timer settings overlap, 5 Select “Change,” and press ENTER

Changing the priority of overlapped settings

If the timer settings overlap, the program that was set last has priority and will be recorded. A timer recording of lower priority may be canceled, start from the middle or stop midway through the program.

You can change the priority of a program if necessary.

1 Press SYSTEM MENU.

The System Menu appears.

2 Select “TIMER LIST,” and press ENTER.

TIMER LIST		10:30 PM
Mon 10/25 8:30PM - 9:30PM	4ch	HQ
Mon-Sat 10:00AM - 10:30AM	25ch	SP
Fri 10/29 9:00AM - 10:15AM	3ch	SLP
Sat 10/30 4:00PM - 5:00PM	125ch SLP

When the timer settings overlap

The program set last has priority.

Example: You set the timer in order of A, B, and C (setting C has first priority)

7:00

A will be cut off

		9:00		11:00
			B
			10:30
					C
	Actual recording
		A	B		C
7:00		9:00		10:30

If you give setting B priority over setting C, all of program B will be recorded and program C is recorded only after program B has ended.

3 Select an overlapped timer setting, and press ENTER.

indicates that the timer setting is overlapped by another timer setting.

4 Select “Check Overlap,” and press ENTER.

Check Overlap

These timer settings overlap.

Mon-Sat 10:00AM - 10:30AM 25ch SP

Fri 10/29 9:00AM - 10:15AM 3ch SLP

ChangeClose

5 Select “Change,” and press ENTER.

Change priority

Fri 10/29	9:00AM - 10:15AM	3ch	SLP	Cancel
Where do you want to move this timer setting?
Mon-Sat	10:00AM - 10:30AM	25ch	SP

	A		B		C
7:00		9:00		11:00

If the end time of one recording and the start time of another are the same

The end of program A will be cut.

7:00 9:00 10:00

A

B

6 Press M/m to change the timer setting’s priority, and press ENTER.

The setting moves to its new location in the list. A timer setting higher up in the list has higher priority.

To return to the Timer List, select “Cancel.”

zHint

You can change the priority of a timer setting while recording.

46