Sony RDR-GX300 ENTER, Notes, To turn off the Timer List, 4 Select one of the options, and press

4 Select one of the options, and press

ENTER.

“Modify”: Changes the timer setting. Select an item using </, and adjust using M/m. Select “OK” and press ENTER.

Modify

Modify the timer setting.									OK
Date	Start			Stop			CH	Mode
									Cancel
Mon-Sat	10	00	PM	10	15	PM	25	SP

“Erase”: Erases the timer setting. Select “OK” and press ENTER.

Erase

Are you sure you want to erase this timer setting?

Mon-Sat 10:00AM - 10:30AM 25ch SP

OKCancel

“Check Overlap”: Checks for overlapped settings.

The timer setting set most recently is listed at the top and has priority over the other settings. You may not be able to record a program of lower priority.

Check Overlap

These timer settings overlap.

Mon-Sat 10:00AM - 10:30AM 25ch SP

Fri 10/29 9:00AM - 10:15AM 3ch SLP

To turn off the Timer List

Press O RETURN.

zHint

While recording, you cannot modify the timer setting for the current recording, but you can extend the recording duration of the recording time (page 41).

Notes

•Even if the timer is set, timer recordings cannot be made while recording a program that has priority.

•Even if the timer is set for the same daily or weekly

program, the timer recording cannot be made if it overlaps with a program that has priority. “ ” will appear next to the overlapped setting in the Timer List.

Check the priority order of the settings.

Recording

ChangeClose

To change the priority of a program, press </

,to select “Change.” For details, see “Changing the priority of overlapped settings” (page 46).

Select “Close” to return to the Timer List. To change or cancel the setting, repeat steps 3 and 4 above.

,continued 45