zHint

For correct speaker location, see the operating instructions supplied with the connected components.

bNotes

•Do not connect your TV’s audio output jacks to the LINE IN (R-AUDIO-L) jacks at the same time. This will cause unwanted noise to come from your TV’s speakers.

•In the connection A, do not connect the LINE IN (R- AUDIO-L) and LINE OUT (R-AUDIO-L) jacks to your TV’s audio output jacks at the same time. This will cause unwanted noise to come from your TV’s speakers.

•In the connection B, after you have completed the connection, make the appropriate settings under “Audio Connection” in “Easy Setup” (page 21). Otherwise, no sound or a loud noise will come from your speakers.

•With the connection B, the surround sound effects of this recorder cannot be used.

*1 Manufactured under license from Dolby Laboratories. “Dolby,” and the double-D symbol are trademarks of Dolby Laboratories.

*2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Step 5: Connecting the

Power Cord (Mains Lead)

Connect the supplied power cord (mains lead) to

 

 

Hookups

the mains. After you connect the power cord

the AC IN terminal of the recorder. Then plug the

 

recorder and TV power cords (mains leads) into

 

(mains lead), you must wait for a short while

and

 

before operating the recorder. You can

Settings

operate the recorder once the front panel display

 

lights up and the recorder enters standby mode.

 

If you connect additional equipment to this

 

recorder (page 22), be sure to connect the power

 

cord (mains lead) after all connections are

 

complete.

 

1 to AC IN

2

to mains

17