3

Select “OK,” and press ENTER.

The date, start and stop times, programme position, recording mode, etc. setting appear.

Using the Quick Timer function

Timer - ShowView

Is the following timer setting correct? To modify, adjust each item or re-enter the timer code.

OK

Cancel

You can set the recorder to record in 30-minute increments.

Press z REC repeatedly to set the duration.

4

Date

 

Start

 

Stop

Prog.

Mode

Wed 28.9

 

 

 

 

 

 

 

 

 

 

 

 

 

21 : 00

22 : 00

 

AAB

SP

Change

•If you want to change the setting, press </ , to select the item and press M/m to change the setting.

To re-enter the ShowView number, select “Change.”

Select “OK,” and press ENTER.

The TIMER REC indicator lights up on the front panel, and the recorder is ready to start recording.

Each press advances the time in 30-minute increments. The maximum duration is six hours.

0:30

 

1:00

 

5:30

 

6:00

 

(normal recording)

 

 

 

 

The time counter decreases minute by minute to 0:00, then the recorder stops recording (power does not turn off). Even if you turn off the recorder during recording, the recorder continues to record until the time counter runs out.

To cancel the Quick Timer

Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode.

To stop recording during timer recording

Open the remote’s cover and press x REC STOP. Note that it may take a few seconds for the recorder to stop recording.

If the timer settings overlap

See page 38.

To extend the recording duration time while recording

See page 38.

To confirm, change, or cancel timer recording

See “Checking/Changing/Cancelling Timer Settings (Timer List)” on page 42.

zHint

The Rec Mode Adjust function also works with this timer method (page 38).

Adjusting the recording picture quality and size

You can adjust the recording picture quality and picture size.

1 2 3

4 5 6

7 8 9

0

</M/m/,,

ENTER

TOOLS

40