Sony RDR-GX310 Press [TIMER], Rec Mode Adjust, Select “OK,” and press ENTER, If the timer settings overlap, To stop recording during timer recording

1

2

3

Press [TIMER].

Timer - Standard

						OK
Set the timer manually.						Cancel
Date	Start		Stop		Prog. Mode
Today		:		:

ShowView

•If the “Timer – ShowView” display appears, press < to switch the display to “Standard”.

Select an item using </, and adjust using M/m.

“Date”: Sets the date.

The item changes as follows:

Today y Tomorrow y …… y Thu

28.10(1 month later) y Sun (every Sunday) y …… y Sat (every Saturday) y Mon-Fri (Monday to Friday) y Mon-Sat (Monday to Saturday) y Sun-Sat (Sunday to Saturday) y Today

“Start”: Sets the start time.

“Stop”: Sets the stop time.

“Prog.”: Selects the programme or input source.

“Mode”: Selects the recording mode (page 36).

•If you make a mistake, select the item and change the setting.

Select “OK,” and press ENTER.

The Timer List (page 42) appears. The TIMER REC indicator lights up on the front panel and the recorder is ready to start recording.

Unlike a VCR, there is no need to turn off the recorder before the timer recording starts.

To stop recording during timer recording

Open the remote’s cover and press x REC STOP. Note that it may take a few seconds for the recorder to stop recording.

Rec Mode Adjust

If there is not enough available disc space for the recording, the recorder automatically adjusts the recording mode to enable the entire programme to be recorded. This function is normally set to “On.”

To cancel this function, press TOOLS while the Timer List is displayed. Select “Rec Mode Adjust” and press ENTER. Select “Off” and press

ENTER.

If the timer settings overlap

Overlapped timer settings are shown as follows.

Timer

These timer settings overlap. Do you want to continue?

Wed	29.10	21:00-22:00 AAB	SP
Wed	29.10	20:30-22:00 DEF	SP

OKCancel

To store the setting as shown, select “OK.” The programme that starts first has priority and the second programme starts recording only after the first programme has finished.

To cancel the overlapped setting, select “Cancel.”

To confirm, change, or cancel timer recording

See “Checking/Changing/Cancelling Timer Settings (Timer List)” on page 42.

To extend the recording duration time while recording

1Press TOOLS during recording to select “Extend Rec,” and press ENTER.

Extend Rec. Time

Set the timer extend function. OK

Cancel

Wed 28.9 10:00 - 11:30 AAB SP

Extend Time

Off

2Press M/m to select the duration time.

You can set the duration in increments of 10 minutes, for a maximum of 60 minutes.

3Select “OK” and press ENTER.

38