Program Edit

+RW -RWVR-RWVideo+R

-R

You can select scenes from a DV/Digital8 format tape, and then automatically record selected scenes to a DVD.

To use this function, you will do the following:

Connect your digital video camera and prepare for recording

m

Select and edit the scenes you want to dub

Using the recorder’s remote control, fast forward or rewind the tape to select the scenes. At this point, the selected scenes are not copied to the disc. The recorder only remembers the IN and OUT points of the scenes that you selected for dubbing. You can also reset, erase, or change the

order of the scenes. m

Dub the selected scenes

After you have selected the scenes, the recorder will fast forward and rewind the tape automatically and record the scenes to a DVD.

How chapters are created

The contents dubbed to DVD become a single title. When “Auto Chapter” of “Features” setup is set to “On,” this title is divided into chapters. When dubbing to a DVD-RW (VR mode), each shooting session on the tape becomes a chapter on the disc. For other discs, the recorder divides the title into chapters at approximately 6-minute intervals.

1Follow steps 1 to 5 of “Preparing for DV dubbing” on page 64, and press SYSTEM MENU.

2Select “DV EDIT,” and press ENTER.

The display asks if you want to start selecting scenes.

Scenes Selection

Do you want to select a scene?

StartCancel

•If you have previously saved a programme, the display asks if you want to edit an existing programme or to create a new programme. To resume editing the existing programme, select “Saved Data,” and go to step 6.

3Select “Start,” and press ENTER.

The display for setting the IN point (start of the scene) appears.

The scene starts to play in the background.

Select scene(Set IN point)

Controlling...

4Select the IN point by pressing m/M, and press ENTER.

The display for setting the OUT point (end of the scene) appears. The scene starts to play in the background from the IN point.

5Select the OUT point by pressing m/M, and press ENTER.

The display asks if you want to add the selected scene to the Scene List menu. To preview the scene, select “Preview.” To reset either the IN or OUT point, select “Change IN” or “Change OUT,” and repeat from step 4.

Scenes Selection

Do you want to capture the scene between IN 0:00:30 and OUT 0:00:52?

OKCancel

Preview

Change IN

Change OUT

66