Video Settings (Video In/ Out)
You can adjust items related to the image, such as size and colour, according to the type of TV or tuner connected to the recorder.
Input Colour System
Selects the colour system when picture noise appears after you change the “Input Line System” setting (page 98).
Auto | Recorder automatically |
| detects signals of colour |
| systems and selects the |
| appropriate colour system. |
|
|
PAL | Selects the PAL colour |
| system when “Input Line |
| System” is set to “PAL/ |
| SECAM.” |
|
|
SECAM | Selects the SECAM colour |
| system when “Input Line |
| System” is set to “PAL/ |
| SECAM.” |
|
|
zHint
When “Input Line System” is set to “NTSC,” you can select “Auto,” “3.58NTSC,” or
Component Video Out
Selects the signal format in which the recorder outputs video signals: interlace or progressive, from the COMPONENT VIDEO OUT jacks.
Normal(Inter- | Outputs signals in the |
lace) | interlace format. |
|
|
Progressive | Outputs signals in the |
| progressive format. Select |
| this when you want to view |
| progressive signals. |
|
|
bNotes
•When picture noise appears after you set the recorder to progressive format, hold down x (stop) on the recorder, and press Z (open/close) on the recorder.
•No video signals are output when using the HDMI connection.
NTSC on PAL TV
Sets the recorder to convert signals of the NTSC colour system to the PAL colour system to play NTSC discs on
On | Plays NTSC discs on PAL- |
| only TVs. |
|
|
Off | Select this if the connected |
| TV is a |
| |
|
|
Adjustments and Settings
103