Sony LINE 1 In, LINE 3 Out, NTSC on PAL TV

bNotes

•When you set “LINE 3 Out” to “RGB,” you cannot set “Component Video Out.”

•When you connect the recorder to a monitor or projector via only the COMPONENT VIDEO OUT jacks, do not set “LINE 3 Out” to “RGB.” If you set “LINE 3 Out” to “RGB,” in this case, the picture may not appear.

•When picture noise appears after you set the recorder to progressive format, hold down x (stop) on the recorder, and press Z (open/close) on the recorder.

•No video signals are output when using the HDMI connection.

LINE 3 Out

Selects a method of outputting video signals for the LINE 3 – TV jack.

Video	Outputs video signals.
S-Video	Outputs S-video signals.
RGB	Outputs RGB signals.

bNotes

•If your TV does not accept S-video or RGB signals, the image will not be displayed in the selected method on the TV screen even if you select “S-Video” or “RGB.” Refer to the instructions supplied with your TV.

•SMARTLINK is available only when “Video” is selected.

•RGB signals are not output when using the HDMI connection.

LINE 1 In

Selects a method of inputting video signals for the LINE 1/DECODER jack. The picture will not be clear if this setting does not match the type of video input signal.

Video	Inputs video signals.
S-Video	Inputs S-video signals.
RGB	Inputs RGB signals.
Decoder	Select this when
	connecting to an external
	decoder (PAY-TV/Canal
	Plus analogue decoder). If
	you connect to a cable box/
	satellite receiver such as
	CanalSat, do not select this
	option.

NTSC on PAL TV

Sets the recorder to convert signals of the NTSC colour system to the PAL colour system to play NTSC discs on PAL-only TVs. Refer to the operating instructions supplied with your TV.

On	Plays NTSC discs on PAL-
	only TVs.
Off	Select this if the connected
	TV is a multi-system
	(NTSC-compatible) TV.

Adjustments and Settings

131