11 Select the setting that matches your TV type.

No Disc Easy Setup

10:10 AM

Select your TV screen type.

16 : 9

4 : 3 Letter Box

4 : 3 Pan Scan

“16:9”: For wide-screen TVs or standard TVs with a wide screen mode.

“4:3 Letter Box”: For standard TVs. Displays “wide screen” pictures with bands on the upper and lower sections of the screen. “4:3 Pan Scan”: For standard TVs. Automatically displays “wide screen” pictures on the entire screen and cuts off the sections that do not fit.

For details, see “Video Settings (Video)” on page 96.

12 Press ENTER.

The setup display for selecting the type of Dolby Digital signal appears.

No Disc Easy Setup

10:10 AM

Dolby Digital

D-PCM

Dolby Digital

14 Press ENTER.

The setup display for selecting the type of DTS signal appears.

No Disc Easy Setup

10:10 AM

DTS

On

Off

15 Select whether or not you want to send a DTS signal to your amplifier (receiver), and press ENTER.

If your AV amplifier (receiver) has a DTS decoder, select “On.” Otherwise, select “Off.”

16 Press ENTER when “Finish” appears.

Easy Setup is finished. All connections and setup operations are complete.

If you use the cable box/satellite receiver control, check that the control works correctly (page 26).

No Disc Easy Setup

10:10 AM

Easy Setup is finished.

Finish

Settings and Hookups

13 Select the type of Dolby Digital signal you want to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby Digital decoder, select “Dolby Digital.” Otherwise, select “D-PCM.”

To return to the previous display

Press O RETURN.

zHint

If you want to run Easy Setup again, select “Easy Setup” in the “Setup” display (page 104).

Note

To record TV programs using the timer, you must set the clock accurately.

,continued 25