To change or cancel timer recording
See “Changing or Canceling DVD Timer Settings (Timer List)” on page 53.
To use the Rec Mode Adjust function
If the remaining disc space is not enough for the current recording, the recorder automatically adjusts the recording mode. Select “AUTO” for “Mode” when setting the timer.
zHints
•You can play the recorded program by selecting the program title in the Title List menu.
•When the start time and the channel or input source to be recorded are the same but the “Media” setting differs, the program is recorded to both the DVD disc and the VHS tape.
•You can also turn on the timer programming menu from the System Menu. Press SYSTEM MENU to select “Timer,” and select
Notes
•Even when correctly set, the program may not be recorded if another recording is underway, or other prioritized timer setting overlaps.
•Before the timer recording starts, “TIMER REC” flashes in the front panel display.
•The recorder automatically turns off when a timer recording finishes, even if the recording started with the recorder turned on.
•The recorder does not record programs with Copy- Never signals. Such recordings stop after a few seconds.
+RW
You can set the recorder to automatically record programs from connected equipment that has a timer function (such as a satellite tuner). Connect the equipment to the LINE 1 IN jacks on the rear of the recorder (page 13).
When the connected equipment turns on, the recorder starts recording a program from the LINE 1 IN jacks.
DVD
1 2 3
4 5 6
7 8 9
0
SYSTEM
MENU
M/m/</,,
ENTER
x STOP
REC MODE
SYNCHRO
REC
Recording DVD
1 Press DVD to operate the DVD recorder.
2 Insert a recordable disc.
3 Select the line input audio.
Set “Line Audio Input” of “Audio” setup to “Stereo” or “Main/Sub” in the “Setup” display (page 100).
,continued 51