Notes

•The recorder starts recording only after detecting the video signal from the connected equipment. The beginning of the program may not be recorded regardless of whether or not the recorder’s power is on or off.

•To use the connected equipment during Synchro-Rec standby, cancel the standby mode by pressing SYNCHRO REC. To return to standby mode again, be sure to turn off the equipment and press SYNCHRO REC, before Synchro-Rec starts.

•The Synchro-Rec function does not work with some tuners. For details, see the tuner’s operating instructions.

•After a recording has finished, the recorder enters the Synchro-Rec standby mode until the SYNCHRO REC indicator turns off.

•You cannot record on a tape with its safety tab removed.

•If Synchro-Rec starts with the recorder turned on, the recorder will turn off when the recording ends.

Changing or Canceling VCR Timer Settings (Timer List)

You can change or cancel timer settings using the Timer List menu.

1

2

3

4

5

6

7

8

9

 

0

 

SYSTEM

MENU

M/m/</,,

ENTER

O RETURN

 

 

 

 

 

 

 

VCR

1

The System Menu appears.

Recording

Press SYSTEM MENU.

 

 

2

Select “Timer,” and press ENTER.

3

Select “Timer List,” and press ENTER.

 

 

Timer List

 

 

 

10:10 AM

 

No. Media

Date

Start

End

Ch

Mode Edit

 

01

VCR

04/15

09:00PM

10:00PM

Line1

SP

 

02

VCR

04/30

09:15PM

09:45PM

Line1

SP

 

03

---

--/--

--:--

--:--

----

---

 

04

---

--/--

--:--

--:--

----

---

 

05

---

--/--

--:--

--:--

----

---

 

06

---

--/--

--:--

--:--

----

---

Timer information displays the recording date, time, recording mode, etc.

If there are more than six timer settings, press

mto display the next page.

,continued 81