Using the Volume Limit function
When the System Audio Control function is active, and the output method changes from the TV speaker to the system speaker automatically, loud sound may be output depending on the volume level of the system. You can prevent this by limiting the maximum volume level.
1 Press AMP MENU.
2 Press x/X repeatedly until “SET HDMI” appears, then press 
or c.
3 Press x/X repeatedly until “VOL LIMIT” appears, then press 
or c.
4 Press x/X to select the maximum volume level you want.
The maximum volume level changes as follows:
MAX y 49 y 48.....2 y 1 y MIN
5 Press AMP MENU.
The AMP menu turns off.
Notes
•This function is available only when the Control for HDMI function is set to on.
•This function is not available when the output method changes from the system speaker to the TV speaker.
Tips
•We recommend that you set the maximum volume level to a little lower than the volume you usually listen to.
•Regardless of the maximum volume level you set, the VOLUME +/– buttons of the system and the remote are operable.
•If you do not want to limit the maximum volume level, select “MAX.”
Using the INPUT SELECTOR buttons of the remote
The INPUT SELECTOR buttons (TV, BD, DVD, SAT) work as follows when the Control for HDMI function is set to on.
•BD, DVD, SAT: The system's audio input is switched to the corresponding component's sound by pressing the button. The TV's video input is also switched to the component's image automatically.
•TV: The system's audio input is switched to the TV sound by pressing this button. The TV's video input is not switched automatically. Select the TV channel you want to watch with the TV remote.
Features Sync “BRAVIA”