There is no picture on the TV screen.
•Check that the TV is selected correctly.
•Set the TV to the appropriate input mode.
Control for HDMI
The Control for HDMI function does not work.
•Check the HDMI connection (page 10).
•Make sure “CTRL: HDMI” is set to “ON” in AMP menu.
•Make sure the connected component is compatible with the Control for HDMI function.
•Check the Control for HDMI settings on the connected component. Refer to the operating instructions supplied with the connected component.
•If you change the HDMI connection, or connect/disconnect the AC power cord (main lead), or if there is a power failure, repeat the procedures of “Preparing for the “BRAVIA” Sync” (page 21).
•The system may not work correctly if you select a component that is not compatible with the Control for HDMI function on the TV side.
•Make sure “DVD CTRL”, “SAT CTRL” or “DMPORT. CTRL” is set to “ON” in AMP menu. If the system input is selected for a component whose “DVD CTRL,” “SAT CTRL” or “DMPORT. CTRL” setting is “OFF,” the Control for HDMI functions, such as
No sound is output from the system and the TV’s speaker.
•Check the volume of the system and the TV.
•Select the input of the system correctly.
The sound is output from both the system and the TV.
•If the Control for HDMI function is set to off, or the selected component is not compatible with the Control for HDMI function, turn off the sound of the system or the TV.
The System Power Off function does not work.
•Change the setting of the TV to turn connected components off automatically when you turn off the TV. For details, refer to the operating instructions of the TV.
An image does not appear on the TV.
•Check whether HDMI IN and HDMI OUT are connected correctly.
A message stating that the output method has changed from the system speaker to the TV speaker appears on the TV screen.
•The Control for HDMI function for the selected component is set to off. For details, refer to “Setting the Control for HDMI function to off for a component without HDMI jacks” (page 23).
Other
The remote does not function.
•Point the remote at the remote sensor 
on the system.
•Remove any obstacles in the path between the remote and the satellite speaker.
•Replace both batteries in the remote with new ones, if they are weak.
•Make sure you select the correct input on the remote.
The volume turns down when the output method changes from the TV speaker to the system speaker.
•The Volume Limit function is working. For details, refer to “Using the Volume Limit function” (page 25).