Adjusting the delay between the sound and the image (A/V SYNC)
You can delay the sound using this function when the image is behind the sound.
DISPLAY | LEVEL MODE | |
| INPUT SELECTOR | |
TV | BD | DVD SAT |
DMPORT |
| AMP MENU |
|
| AMP |
|
| MENU |
C, X, x, c, |
|
|
RETURN |
| DMPORT |
| MENU | |
ALBUM- ALBUM+ | ||
MUTING |
|
|
VOLUME | SOUND FIELD | |
Enjoying Dolby Digital sound at low volume (AUDIO DRC)
You can narrow the dynamic range of the sound track. This function is useful for enjoying movies at low volume. AUDIO DRC only applies to Dolby Digital sources.
DISPLAY | LEVEL MODE | |
| INPUT SELECTOR | |
TV | BD | DVD SAT |
DMPORT |
| AMP MENU |
|
| AMP |
|
| MENU |
C, X, x, c, |
|
|
RETURN |
| DMPORT |
| MENU | |
ALBUM- ALBUM+ | ||
MUTING |
|
|
VOLUME | SOUND FIELD | |
1 Press AMP MENU.
2 Press X/x repeatedly until “A/V SYNC” appears, then press 
or c.
3 Press X/x to select the setting.
•OFF: Does not adjust.
•ON: Adjusts the difference between image and sound.
4 Press AMP MENU.
The AMP menu turns off.
Notes
•You may not be able to adjust the delay between sound and image perfectly using this function.
•This function is useful only for Dolby Digital, DTS and Linear PCM (2ch) input by coaxial (audio), optical (audio) or HDMI.
1 Press AMP MENU.
2 Press x/X repeatedly until “AUDIO DRC” appears, then press 
or c.
3 Press x/X to select the setting.
•OFF: No compression of dynamic range.
•STD: Reproduces the sound track with the kind of dynamic range that the recording engineer intended.
•MAX: Compresses dynamic range fully.
4 Press AMP MENU.
The AMP menu turns off.