Setting the Code for Preset Audio and Visual Components (continued)

1While pressing COMMANDER OFF, press MUTING.

4Aim the Commander at the component and press the POWER key.

All the component names on the display flash.

2Press the Component Select button for the desired component.

When the remote control signal is sent,is displayed on the display.

If it successfully works (power-off for TV, power-on for VCR, DVD, SAT, CBL, AMP, and playback for VD, CD, MD, TAPE), go to Step 5.

If it doesn’t, repeat Steps 3 and 4.

5Press the ENTER key.

A beep sounds, and the code number and “ENTER” appear twice.

Note

It is recommended to write down the code number.

6 Press COMMANDER OFF.

3 Press CHANNEL + or CHANNEL –.

Press CHANNEL + to go to the next code number.

Press CHANNEL – to go back to the previous code number.

12