Executing a Series of Commands

—System Control Functions (continued)

Example: To program the procedure on page 23 for the VCR3 button

Programming a series of commands to the Component Select buttons

As with the SYSTEM CONTROL buttons, you can also program a series of operating commands for the Component Select buttons (up to 16 steps).

To execute the commands programmed on a Component Select button by the System Control function, press the button for more than 2 seconds.

Notes

•The programmed commands are executed when you press a Component Select button for more than 2 seconds. When you press the button for less than 2 seconds, it works as the normal Component Select button, and the corresponding touch-keys are displayed.

•See also “Tips for programming the System Control functions” on page 25 and “Notes on System Control Operations” on page 27.

1While pressing COMMANDER OFF, press VOLUME+ and VCR3.

All the component names flash.

If a series of commands is already programmed for that button

The programmed operations are displayed in order. To program a new series of operations, clear the program first (page 29).

2Follow Steps 2 to 5 on pages 24 and 25.

28