SymptomRemedy

The power of the Commander turns off by itself.

The power of the Commander does not turn on when you press a button.

Your Commander does not work as expected after data transfer.

This Commander is preset at the factory to switch the power off automatically after 10 minutes if left unused. (Auto Power-Off, page 49) You can change the power-off time from 10 to 90 minutes, or set the Commander not to power off automatically.

The Hold function is on (“OFF” appears on the display). Unlock the Hold function (page 47).

Data transfer to/from a single button cannot transfer System Control functions that are learned by Component Select buttons. Either set up the learned Commander from the start, or perform whole data transfer.

Note on the Commanders with the mark

Data transfer between Commanders with the mark may not always be complete, depending on their functions and keys, and some of the System Control function data may be dropped.

For the customers in the U.S.A.

Customer Support Information

After you have read through this manual, if you still cannot get the Remote Commander to work properly, call the Sony Customer Support Helpline at 1-800-822-2217.

57