Selecting a Channel with a Single Key Press
—Channel Macro Function (continued)
4Release the macro key (PIP INPUT).
“PIP INPUT,” “1,” “2,” “3,” and “ENTER” appear twice.
5Press COMMANDER OFF.
Notes
•You cannot program the Channel Macro function for a macro key that has “learned” a signal. Try again with another macro key, or clear the “learned” signal (page 20) from the button and program the Channel Macro function on it.
•If you change the component code for a key that has been programmed with the Channel Macro function, the new signal is transmitted when you press the corresponding macro key.
To clear the Channel Macro function
1While pressing COMMANDER OFF, press MUTING.
2While pressing CHANNEL+, press the Component Select button (TV).
3While pressing the RESET key, press the macro key.
Note
The procedure above can clear only the Channel Macro function from the key. It doesn’t clear the learned signals from that key.
46